Leading 10 common forklift accidents ， forklift operation should take note of these matters ！.
Leading 10 common forklift accidents ， forklift operation should take note of these matters ！.
Blog Article
Do not undervalue the forklift at the workplace. If the operation is not good, there will be severe crashes in mins, and there are many accidents involving forklifts.
Case 1: The forklift cargo blocked the chauffeur's sight, and the person in front could not be found, causing a moving accident.
Case 2: In order to maintain the equilibrium of the forklift when raising hefty items, the workers used their body weight as the counterweight, which virtually created casualties.
Situation 3: The width of the forklift cargo exceeds the allowable size of the course and hangs on the roadside shelf, which almost creates an crash.
Situation 4: Forklift is speeding and rolls over throughout a turn.
Instance 5: The forklift motorist did not discover the pedestrian, and the pedestrian did not discover the forklift.
Case 6: The forklift raises the workers illegally, the forklift driver does not put on the seat belt, the forklift lifter falls and the vehicle driver is squashed when the forklift rolls over.
Instance 7: The forklift motorist did not use a seat belt and dropped from the lorry when it rolled over and was crushed.
Forklift procedure must pay attention to these matters ：.
Beginning.
1. Prior to starting, observe the environments, and after validating that there are no obstacles that prevent the security of driving, honk the horn initially and then begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) scale should be risk-free prior to starting.
3. When the forklift begins with a load, the driver needs to first validate that the load is secure and reputable.
4. The start needs to be sluggish and constant.
Driving.
1. When driving, the height in between the bottom end of the fork and the ground should be maintained 300mm-400mm, and the pole ought to be slanted backward. .
2. Do not lift the fork too expensive when driving. When entering and leaving the job site or while driving, beware that there will be no obstacles in the sky. When the load is traveling, the fork must not be increased expensive, which will certainly influence the security of the forklift. .
3. After dumping, the fork ought to be reduced to the regular driving position before driving. .
4. When turning, if there are pedestrians or lorries nearby, the driving signal ought to be provided initially. High-speed doglegs are prohibited. High-speed sharp turns will trigger the lorry to shed side stability and tip over. .
5. When the forklift is downhill, it is strictly prohibited to shut off the fire and slide, and it is restricted to brake suddenly while driving with loads unless there are special scenarios.
6. When the forklift is running, it has to comply with the traffic rules in the factory and must keep a specific security range from the automobile ahead. .
7. When the forklift is running, the load has to be in the most affordable placement that does not hinder the driving, and the gantry needs to be effectively tilted back. The tons shall not be elevated other than when stacking or packing. .
8. The height of the load should not obstruct the vehicle driver's sight. In special circumstances, when the item affects the forward vision, drive at a reduced rate when turning around.
9. It is restricted to turn on the ramp, neither to drive across the ramp. .
10. The risk-free driving rate of the forklift in the factory area is 5 km/h, and it has to drive securely at a low speed when entering the manufacturing workshop area. .
11. When the forklift is raised, lifted or driven, it is restricted for employees to base on the fork to hold things and play a stabilizing role. .
12. If problems are discovered, they will be repaired and reported in a timely manner, and they will never operate with illnesses or hide them.
packing and dumping.
1. When fork-loading things, the range in between the two forks should be readjusted as required to make the lots of the two forks well balanced and not manipulated, and one side of the item should protest the rack. .
2. It is restricted to work with a solitary fork or utilize a fork top or draw. In unique conditions, security indication must be established to advise bordering pedestrians. .
3. In the process of loading and dumping things, the forklift should be stopped with the brake. .
4. The rate of the car must be sluggish and consistent. Be careful not to roll the wheels on the dunnage, so as not to stretch the rolled things and injure people. .
5. When making use of a fork to fork the goods, the fork must be as deep as possible under the tons, and it ought to be kept in mind that the fork tip must not touch other items or things. The tons should be supported with minimal back tilt of the gantry to make sure that the lots does not move backwards. The mast can be slanted onward slightly when the tons is decreased to allow for simple placement of the load and extraction of the forks. .
6. It is forbidden to fork products at broadband and ram hard objects with the fork head. .
7. When the forklift is working, it is restricted for people to stand around the fork, so regarding stay clear of the collapse of the goods and injure individuals. .
8. Straining is banned, and it is forbidden to make use of forks to raise personnel to participate in high-altitude operations to avoid high-altitude falling mishaps. .
9. It is not enabled to utilize the brake inertia to slide, place, round or roll objects. .
10. It is not enabled to make use of forks to choose, turn pallet unload.
Leaving .
1. It is prohibited to leave the forklift when the things on the fork are in the air. Prior to leaving the forklift, you need to dump the goods or lower the fork frame.
2. Pull the emergency brake deal with to dead or depress the hand brake switch.
3. The engine is shut off and the power is cut off. (Except for unique conditions, such as the driver does not leave the vehicle's line of sight and does not exceed 1 min).
4. Eliminate the key. .
Forklift Operation Precautions.
1. Prior to and after the forklift operation, the look must be inspected, and gas, lubing oil and air conditioning water must be added.
2. Check the safety efficiency of starting, running and braking.
3. Check whether the lights and horn signals are full and efficient.
4. During the operation of the forklift, check whether the stress and temperature level are regular.
5. After the forklift is running, the outside leak ought to additionally be checked and the seals ought to be replaced in time.
Forklift Safety Operation Specifications.
1. You have to examine prior to leaving the auto;.
2. When you encounter somebody before you throughout driving, you must send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not exceed 5 km/h;.
4. When driving, the nadir of the cargo must be 0.3 m ~ 0.4 m above the ground;.
5. The turning should not be also sharp to prevent the tendency of " complimentary turning";.
6. Adding and down the slope should be slow-moving and uniform, and no switching on the incline is enabled.
7. Do not drive throughout the gradient. When the gradient is above 10%, the lorry ought to be driven backwards when going downhill;.
8. When the forklift personnel lug the goods and progress, if they encounter huge or heavy goods and go to the chauffeur's line of sight, they need to take the reversing workout
.
The "Eight Prohibitions" need to be complied with in the procedure.
1. Solitary fork procedure is not enabled.
2. It is not enabled to raise the goods for cross country driving.
3. It is not permitted to pick up the goods by turning over the pallet with the fork.
4. It is not enabled to directly shovel chemicals, flammables and other hazardous chemicals with forks.
5. It is not enabled to use inertia pressure to grab the goods.
6. It is not permitted to utilize stopping force to exile round or easy-to-roll items.
7. It is Stand-on Electric Pallet Stacker not allowed to bring people to deal with the pallet or fork, and it is purely prohibited to stand under the fork after the fork is raised.
8. Do not drive side to side on inclines
.
Auto parking is not permitted under the following problems.
1. Contours, narrow roadways, train crossings;.
2. Sections with a longitudinal incline greater than 5%.
3. When there is an barrier on one side of the roadway, the opposite side of the section with the exact same Electric Forklift Truck for Warehouse size as the obstacle should be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844